Technical development service providers often possess highly specialized expertise. They develop electronics, design mechanical components, simulate complex systems, program embedded software, or support companies in the development and industrialization of new products.
The challenge rarely lies in the fact that these services aren’t needed at all.
The real challenge is figuring out which companies are currently working on products that require precisely these skills.
Many development projects arise outside of existing customer relationships. The need is often not publicly advertised. And even when a company announces a new product development, it remains unclear at first whether it needs external support for it.
This raises a crucial question for the sales team:
Which companies are developing products that might require our specific technical expertise, and what indications suggest that outsourcing would be a good idea?
Those who systematically examine these connections can identify new project clients in a much more targeted manner.
Let’s take an engineering firm that specializes in the development of power electronics.
Traditional sales research might identify manufacturers of electrical appliances, machinery, vehicles, and industrial equipment.
But not every company in these industries needs external support for the development of power electronics.
Some manufacturers have their own development departments with the necessary expertise. Others rely entirely on purchased assemblies. Still others are currently developing new products that require specialized knowledge in power electronics.
These differences can hardly be deduced from industry affiliation, revenue, or number of employees.
A more relevant question is what products a company develops, what technologies are used in them, and what technical challenges arise as a result.
For example, a manufacturer of industrial drive systems that is developing a new generation of energy-efficient motor controls could be a potential customer.
So, too, could a company that needs more powerful battery management systems or is integrating electric drive technologies into products that were previously mechanical.
The key factor is the connection between the customer’s product development and the service provider’s expertise.
A successful search for new customers begins with a precise analysis of the development services offered.
What technical tasks can the service provider handle? What technologies does it master? For which products and development phases are its services suitable?
These include, for example:
These areas of expertise can be used to identify specific development tasks where potential customers might need support.
For a company with expertise in embedded software, for example, manufacturers developing new smart devices, integrating additional communication interfaces, or adding digital functions to existing products would be of interest.
For a specialist in flow simulation, on the other hand, manufacturers of pumps, turbines, heat exchangers, or ventilation systems could be relevant.
This results in a competency-based Ideal Customer Profile (ICP).
The target audience is not defined solely by industry but rather based on the products, technologies, and development requirements of potential customers.
Not every company with its own product development department is automatically a suitable customer.
The need often arises when a company cannot achieve a development goal efficiently enough with its available internal resources.
Four typical situations can be distinguished here.
A company is developing a new product but requires expertise that is not available internally—or is available only to a limited extent.
For example, a machine manufacturer wants to develop a complex electronic control system on its own for the first time.
To do so, it may require external support in the areas of electronics architecture, embedded software, or functional safety.
A company has its own development departments but cannot handle additional projects with its existing capacity.
New product variants, concurrent development projects, or short-notice customer requirements can trigger a need for additional resources.
In such situations, external service providers take on clearly defined development tasks or support existing project teams.
A company wants to integrate new technologies into its products or must meet changed technical requirements.
Examples include new communication standards, higher energy efficiency, more complex safety requirements, or more demanding material properties.
A specialized service provider can help implement these requirements from a technical standpoint.
A product must be brought to market within a tight timeframe.
Internal resources may not be sufficient to handle all development tasks simultaneously.
External experts can take on individual work packages and thereby help accelerate the development process.
In all four situations, the key factor is whether there is a need for specialized support and whether outsourcing is feasible from both a financial and organizational standpoint.
Many companies do not publish direct requests for external development services.
Nevertheless, there are clues from which potential development tasks can be inferred.
For example, one manufacturer announces a new product generation. Another expands its portfolio to include digital features. A third company is seeking several development engineers with specialized qualifications.
Such information can indicate changes within product development.
Particularly relevant are:
However, a job posting is not necessarily proof of a need for external service providers.
Similarly, a new product development can be carried out entirely with in-house resources.
The information is initially intended to identify companies with potentially relevant development tasks.
Whether there is actually a need for external services must then be assessed.
When searching for development service providers, two questions must be addressed separately.
First: Does the company have a technical development task that matches our expertise?
Second: Is there any indication that the company might outsource this task?
For example, a manufacturer may engage in extensive software development yet still carry out all development tasks in-house.
Conversely, a smaller machinery manufacturer with few in-house developers may need to rely on external specialists for a challenging electronics project.
To prioritize effectively, therefore, several criteria should be examined.
Technical Competency Fit: Do our development capabilities align with the company’s products and technical challenges?
Specific development activities: Are there indications of new products, technologies, projects, or changing requirements?
Internal resources: Which development functions are clearly available, and where might there be gaps in capacity or expertise?
Willingness to Outsource: Are there indications of existing development partners, external service providers, or relevant project contracts?
Economic project potential: Is the potential scope of work large enough to justify an economically attractive contract?
Timing: Is the company currently in a project phase where external support would be beneficial?
Combining these criteria provides a much more solid foundation for acquiring new customers than a general list of companies with development departments.
For specialized development services, the number of truly suitable clients is often significantly smaller than for standardized products.
A company must meet several requirements simultaneously: It needs a technical development service that aligns with the service provider’s area of expertise. At the same time, there must be a concrete or foreseeable project need for which external support is a viable option.
Added to this are economic criteria such as project volume, budget, time requirements, and a fundamental willingness to outsource development services to external partners.
For an illustrative sales planning example, we’ll consider 500 researched contacts per month.
We assume that only 2 to 3 percent of these sufficiently meet the key eligibility criteria to be prioritized as particularly interesting target contacts.
This corresponds to 10 to 15 highly relevant contacts per month.
Extrapolated over a year, this results in a theoretical potential of 120 to 180 prioritized contacts.
These figures are model assumptions and not proven success rates. Even a highly relevant contact does not yet constitute a confirmed project inquiry.
Acquiring technical development projects is a time-consuming process.
Even preparing for an initial meeting may require a detailed analysis of the potential customer’s products, technologies, and development activities.
If the sales team focuses on 10 to 15 particularly relevant contacts, it can invest significantly more time in technical preparation and a personalized approach.
The goal is not to contact as many companies as possible, but to identify those with whom there is a technically and economically sound reason to engage in a conversation.
Especially with complex development projects, even a single new customer can be economically attractive over several years.
Let’s look at a simple model calculation.
A sales representative needs an average of 30 minutes to prepare for and make initial contact with a potential customer.
For 500 contacts, that would amount to 250 working hours.
If, on the other hand, the sales team focuses on the 10 to 15 prioritized target contacts, this processing time is reduced to 5 to 7.5 hours.
That corresponds to a reduction of 97 to 98 percent in this initial sales phase.
This calculation takes into account only the initial follow-up. The time required for preliminary research and qualification, as well as subsequent technical discussions, workshops, and proposals, is not included.
Furthermore, more intensive follow-up with high-value prospects may require more time per contact.
The real benefit, therefore, lies not solely in the calculated time savings.
The sales team can allocate its resources much more strategically to analyzing specific development tasks and preparing for in-depth customer discussions.
Instead of approaching numerous general companies, the team focuses on a small number of target customers with clear technical and economic relevance.
For technical development service providers, the value of a specific project is the primary consideration.
At the same time, a successfully completed development project can lead to further orders.
For example, a service provider might initially develop the electronics for a new series of machines.
This may subsequently lead to additional tasks in software development, validation, adaptation of further product variants, or transition to series production.
As a result, a single client may award various development contracts over several years.
Let’s assume a development service provider wins a new client for an electronics and embedded software project.
The first development project has an assumed contract value of 150,000 euros.
Over the next two years, additional development contracts totaling 200,000 euros are awarded.
This results in a calculated potential customer revenue of 350,000 euros over three years.
Actual profitability depends on project costs, capacity utilization, the specialists assigned, and the achievable margins.
This calculation is an illustrative example, not a revenue forecast.
However, it demonstrates why a single suitable development client can be significantly more valuable than numerous unqualified initial contacts.
Clients who regularly develop new products and consistently engage external development partners for specific technologies become even more valuable.
When it comes to development services, identifying a suitable company alone does not determine the quality of the sales opportunity.
It is equally important to address the right role within the company.
Depending on the service offering and development project, different individuals may be relevant.
For electronics and embedded software projects, for example, development managers, electronics development managers, software architects, or technical project managers are key contacts.
For mechanical design, design managers, product development managers, or those responsible for research and development may be the appropriate contacts.
For material testing and validation services, quality management, testing engineering, or regulatory affairs personnel may also be involved.
Purchasing often becomes relevant as soon as a technical requirement leads to the actual procurement of external services.
When approaching customers, it is therefore crucial to align the expertise offered with the likely development task and the relevant role.
A general offer for engineering services will often receive little attention.
In contrast, a technically grounded approach addressing a specific technology, product development, or technical challenge provides a clear basis for discussion.
The approach described can, in principle, be carried out manually.
To do so, sales representatives would have to examine numerous companies, analyze products and technologies, evaluate development activities, and identify potential internal gaps in expertise.
In addition, they would need to identify the relevant contacts and determine whether outsourcing the work is even a realistic option.
This effort can be considerable.
Assuming 20 minutes of manual research per contact, 500 contacts would require approximately 167 working hours per month.
At an estimated personnel cost of 60 euros per hour, this corresponds to a calculated monthly research cost of approximately 10,000 euros.
For complex technical issues, the actual cost per company can be significantly higher.
The research process must therefore be organized efficiently enough to ensure that systematic new customer acquisition is economically viable.
Specialized research solutions such as bloo.research can assist here.
The research begins with an analysis of the engineering firm’s technical expertise and services.
Based on this, specific search profiles are developed that describe which products, technologies, and development tasks are particularly relevant to the company’s own service offerings.
Companies whose product portfolios, development activities, or technical requirements match these criteria can then be identified.
Additional publicly available information can help identify potential development projects and possible opportunities for external support.
The standard package includes 500 researched contacts per month.
Assuming a prioritization rate of 2 to 3 percent, this can result in 10 to 15 particularly interesting target contacts.
A key advantage is that the search for and initial evaluation of potential companies are conducted systematically.
Sales representatives do not have to research every company from scratch and can invest more of their time in evaluating specific project opportunities and conducting in-depth customer discussions.
However, public research often cannot conclusively determine whether a development project will actually be outsourced.
This question must be clarified in direct discussions with the client.
AI-supported research thus primarily improves the selection and preparation of suitable target companies. It does not replace the technical evaluation of an actual project opportunity.
The previously calculated 167 hours of manual research serve as a benchmark. They do not represent a guaranteed time savings, as the actual effort required depends on existing workflows and the necessary additional training.
For specialized development service providers, the most promising customer potential lies with companies whose product development requires precisely the expertise that the service provider offers.
The industry alone is not the decisive factor here.
More important are the products, the technologies used, the technical challenges, and whether internal resources are sufficient to address them.
Those who systematically analyze these interrelationships can identify new project clients and focus their sales resources on economically attractive development projects.
The key task is to filter out, from a large market, the few companies where technical suitability, potential project needs, and economic potential converge.
AI-powered research can help conduct this search efficiently and significantly reduce the manual effort involved.
Find out which manufacturers are working on products and technologies where your development services might be in demand.
Learn more about bloo.research