bloo.research Use Cases

How Manufacturers of Industrial Standard Components Attract New Production-Run Customers

Written by Lars-Thorsten Sudmann | Nov 18, 2026, 8:43:34 PM

Find new customers based on their products and applications and build long-term recurring revenue

Manufacturers of industrial components have a decisive advantage: Their products are often needed in large quantities and over many years.

Whether sensors, bearings, seals, valves, fasteners, or electrical components—many of these components fulfill standardized technical functions and can be used in a variety of machines, devices, and systems.

This presents a unique opportunity for sales. A new customer may not just mean a single order, but rather regular orders over several years.

The challenge lies in identifying those manufacturers whose products already have a need for such components today.

After all, the crucial question is not: Which companies belong to our target industry?

But rather: Which manufacturers regularly need our components for their products?

1. Why Traditional Industry Research Yields Too Many Unsuitable Companies

A manufacturer of industrial pressure sensors wants to acquire new customers.

An obvious strategy would be to research companies in the mechanical and plant engineering sector.

But this industry encompasses thousands of companies with completely different products and requirements.

A manufacturer of hydraulic power units may need pressure sensors to monitor and control its systems. A compressor manufacturer uses similar components for pressure control. A manufacturer of industrial test benches uses sensors for measurement and testing tasks.

Other mechanical engineering companies, on the other hand, may not need pressure sensors at all or may use technologies that do not fit into their own product portfolio.

An industry list does little to highlight these differences.

For a targeted search for new customers, it is therefore necessary to investigate which products a potential customer manufactures and which components are required for their technical functions.

This approach also makes it possible to identify companies outside the previously known target industries.

2. The Better Approach: From Your Own Standard Product to the Customer’s Application

A systematic search begins with an analysis of your own component portfolio.

What functions do the products serve? What performance ranges and technical characteristics do they have? Under what conditions can they be used?

For a pressure sensor, for example, the measurement range, accuracy, design, connection type, electrical interfaces, media compatibility, and temperature range would be relevant.

Specific application possibilities can be derived from these characteristics.

Next, we examine which manufacturers produce machines, devices, or systems in which such applications are found.

Three questions are central to this process:

Does the technical function fit the application?

The component must perform a task that is actually required in the potential customer’s product.

Can an existing standard product be used?

Applications in which readily available components can be used without time-consuming custom development are particularly attractive.

Is there a regular demand?

Manufacturers who continuously produce their products and therefore procure components on a recurring basis are of particular interest.

These criteria form the basis of an application-oriented Ideal Customer Profile (ICP).

The target group is thus defined not solely by industry and company size, but based on a clear technical and economic need.

3. The need often already exists. The company is looking for a new supplier.

For manufacturers of standardized industrial components, the sales situation differs fundamentally from the traditional capital goods business.

A company that produces 1,000 hydraulic units annually may already require several pressure sensors per unit today.

The need, therefore, does not have to arise from a new investment.

The company is likely already sourcing the components from an existing supplier.

The sales challenge, therefore, is to position oneself as an additional or alternative supplier.

There may be various reasons for this.

A new supplier may offer a technically comparable component on more attractive terms. It can guarantee shorter delivery times, offer additional product variants, or help reduce dependence on a single supplier.

New product generations also present opportunities, as manufacturers review the selection of components used when developing their devices and machines.

However, existing product approvals, supply contracts, and quality requirements must be taken into account. Even technically compatible standard components may require sampling or re-approval.

A good product fit therefore does not guarantee an order. It is the foundation for a commercially sound sales approach.

4. Why a repeat customer can be valuable for years

In the standard components business, the value of the first order isn’t necessarily the deciding factor.

Much more important is the volume a customer regularly requires and how long a supply relationship can last.

An example from industrial sensor technology

A manufacturer of hydraulic power units produces 500 units annually.

Two pressure sensors are used in each unit.

This results in an annual demand of 1,000 sensors.

Assuming a selling price of 80 euros per sensor, this corresponds to a potential annual revenue of 80,000 euros.

If production volumes, prices, and market share remain constant over five years, this results in a projected revenue potential of 400,000 euros.

And that’s with just a single customer.

Of course, this is not a guaranteed revenue trend. The actual market share achievable, the margin, the order volumes, and the duration of the customer relationship are all decisive factors.

However, this example illustrates the economic difference compared to one-time project business.

A suitable repeat customer can generate revenue continuously over many years.

That is why component manufacturers should focus more on expected annual purchase volumes and long-term customer value when seeking new customers, rather than on the size of a potential initial order.

5. Select the 100 to 150 most promising contacts from the 500 researched

For standardized components, the search can often be conducted on a broader scale than for complex machines and systems.

Many manufacturers require comparable technical functions. At the same time, the characteristics of existing standard products can provide a relatively clear basis for the initial evaluation of potential customers.

Let’s assume a component manufacturer researches 500 potential contacts each month.

For illustrative sales planning purposes, we’ll assume that 20 to 30 percent of these are a particularly good fit for the company’s own portfolio and have attractive mass-production potential.

This results in a selection of 100 to 150 prioritized contacts per month.

The assumed rate is not a proven success metric. It depends heavily on the product group, the quality of the research criteria, and the respective target market.

Prioritization should be based primarily on the following criteria:

Technical product fit: Do the characteristics of our standard components meet the application’s requirements?

Mass-production potential: How many components might the company regularly need based on its products and production volumes?

Integration effort: How easily can our existing products be integrated into the application?

Economic attractiveness: Do potential purchase volumes, margins, and requirements align with our own business model?

Supplier potential: Are there valid reasons why the company might consider an additional or alternative supplier?

The goal is not to approach as many companies as possible.

The goal is to identify those manufacturers with whom a technically suitable and economically attractive supply relationship appears particularly likely.

6. Greater Sales Success Through Focus on Suitable Volume Buyers

A component manufacturer must operate profitably when acquiring new customers.

Individual orders are often smaller than in the machinery and plant engineering sectors. At the same time, regular orders can ensure stable long-term revenue.

That’s why it’s worthwhile to identify as many fundamentally suitable volume buyers as possible and then specifically target the most attractive companies.

Let’s consider a simple example.

A company researches 500 potential contacts each month. Of these, 125 are classified as particularly relevant.

Instead of following up on all 500 contacts with the same amount of effort, the sales team focuses on these 125 companies.

Assuming 30 minutes for preparation and initial follow-up, all 500 contacts would require 250 working hours.

For 125 prioritized prospects, the same effort amounts to just 62.5 hours.

This corresponds to a calculated reduction of 75 percent.

This analysis considers only the initial sales follow-up. The time required for research, qualification, and potential technical coordination must be added.

The real benefit lies in the fact that the sales team can devote more time to technically sound customer discussions, sample requests, quotes, and building long-term supplier relationships.

7. Economic success comes from recurring revenue

Another model calculation illustrates just how beneficial this approach can be.

Suppose a component manufacturer gains five additional production-run customers within a year through its systematic new-customer acquisition efforts.

After a successful ramp-up, each of these customers generates an average annual revenue of 30,000 euros.

Once this revenue level is reached, this results in an additional annual revenue potential of 150,000 euros.

With a stable customer base, this revenue could be generated again in subsequent years.

Of course, the actual results depend on the agreed-upon supply shares, purchase volumes, prices, margins, and the duration of the customer relationships.

Acquiring new customers also takes time. Sample submissions, technical reviews, and supplier approvals can take several months.

Therefore, sales success should not be measured solely on the basis of newly acquired contacts.

More important are the number of qualified production customers, the success rate for sample submissions and approvals, the actual annual revenue achieved, and the development of customer relationships over several years.

8. The Challenge: Efficiently Researching Suitable Applications and Manufacturers

In principle, such a target customer strategy can be implemented manually.

However, this would require the sales team to examine numerous manufacturers, analyze their products, evaluate technical applications, and identify potential contacts.

Especially with standard components, the number of potential applications and companies can be very large.

Assuming an average of 20 minutes of manual research per contact, just 500 contacts would require approximately 167 working hours per month.

Assuming internal labor costs of 60 euros per hour, this corresponds to a calculated monthly research cost of approximately 10,000 euros.

This effort occurs before the sales team begins the actual follow-up with the identified prospects.

The method is therefore particularly valuable when research and initial qualification can be systematically organized.

9. How AI-powered research supports the development of new repeat customers

This is where specialized research solutions such as bloo.research come into play.

Concrete research profiles are developed based on the technical characteristics and potential applications of standardized components.

Companies can then be identified and qualified based on their products, technologies, and potential applications.

This is not just about collecting company data. The key is to establish a clear connection between the component being offered and a potential need at the target company.

The standard bloo.research package includes 500 researched contacts per month.

Assuming a prioritization rate of 20 to 30 percent, this could result in 100 to 150 particularly interesting target contacts each month.

The sales team can then focus on companies where technical product fit, economic mass-production potential, and potential entry opportunities all align.

AI-powered research handles significant portions of the search and initial qualification. This can significantly reduce the manual research effort described earlier.

The actual time savings depend on the previous research process, the availability of technical information, and the required follow-up qualification.

Conclusion: The right production-volume customers are more valuable in the long term than large contact lists

For manufacturers of standardized industrial components, a significant portion of the market potential lies with companies that already regularly require suitable components.

Identifying these companies is often not a matter of timing the investment correctly.

The key is to understand what products they manufacture, what technical functions they require, and which standard components are suitable for those needs.

Systematic research lays the foundation for finding new volume customers outside of existing customer relationships and building long-term recurring revenue.

With AI-powered research, this approach can also be implemented across larger markets without having to manually examine every potential customer individually.

Which manufacturers might need your components on a regular basis?

Find out in which products and applications your standard components can be used and which companies are potential long-term volume customers.

Learn more about bloo.research